Tiny Transformer RV Camper Turns From Truck To Two Storey House
Production process (To camping-car completion)To the completion of the camping car, it took two years and two months
The Main Body
The steel pipe is welded,
and the platform is made.
The frame is painted by anticorrosive paint.
Sets up a pole on the
platform.
Frames are connected by the welding.
Plywood over a floor.
It buries with the patty, the sandpaper is put, and the tie eyes of plywood are
flattened.
The adhesive and Topping
fix plywood.
The sink and water service
are installed.
The gas tube is installed.
(We asked the professional for the gas construction. )
Distribute wires to
different parts of a camping-car.
The wall is covered with
the coated plywood board.
The stairs are made.
The bath tub is installed.
The bath boiler is set up.
The wall is covered with the cedar siding.
The floor in the bathroom
is waterproofed with FRP.
In addition, it paints and
finish.
The toilet is installed
The Second floor part
The steel frame is
assembled.
The frame of the second
floor is a hybrid of the wood and steel. (For lightening).
The ceiling board is fixed.
The shoji is
made.
The wall is covered with
the wallpaper.
The tatami-mat
is made
The heat insulator is put
between walls.
The aluminum board is over
to the outside wall.
The body
The TOYOTA track is the
used.
The ceiling is cut out.
Hatchback was welded and
installed. The glass sunroof can have been done by this.
The body is painted on
argent.
Perform a docking maneuver
Join body to house
The body is carefully put.
Docking success !!
Others Part
Air cylinder
The air cylinder is making by myself.
Gray tank
The gray tank is made of FRP. Because the tank had been made on a hot day of summer, it was very stinky !!
Door
The door is a wooden frame.
water tank
The water tank is made of the stainless steel.
Step / Black tank
These process and make the steel plate.
The electric wiring of the cabin
The added relay becomes 20 or more.
Outrigger
An electric outrigger is making by myself
Deck
The frame is an steel pipe.
cypress board paints the waterproofing paint.
The aluminum version is put outside, and it assembles it to the body.
Last spurt
The rear-light etc. are
built in.
Foot is strengthened.
Completion
Government inspection is
received.
The numberplate was able to be taken.